Technical Specifications

Comprehensive Technical Specifications Overview

S. No	Properties	Test Method	Unit of Measurement	Atrributes of performance	Results
1.	SURFACE QUALITY
1.1	Surface Quality	EN 438-2.4	mm2 /m2	Sports, dirt and similar surface defects	≤1
1.1	Surface Quality	EN 438-2.4	mm2 /m2	Fibers. hair and scratches	≤10
2.	DIMENSIONAL PROPERTIES
2.1	Thickness	EN 438-2.5	mm	8.0 ≤t < 12.0mm:±0.50mm	8.0 ≤t < 12.0mm:±0.50mm
2.2	Size	EN 438-2.6	mm	Length and Width+ 10/-0	+05/-0
2.3	Straightness of edges	EN 438-2.7	mm/m	Straightness of edges ≤ 1.5	≤1
2.4	Squareness	EN 438-2.8	mm/m	Squareness ≤ 1.5	≤1
2.5	Flatness (measured on full size sheet)	sheet) EN 438-2.9	mm/m	For 2.0 ≤ t < 6.00mm:8	5
			mm/m
			mm/m	For 6.0 ≤ t < 10.00mm : 5	3
			mm/m	10.0 ≤ t:3	2
3.	PHYSICAL PROPERTIES
3.1	Resistance to Surface wear	EN 438-2-10	Revolutions	Wear Resistance – Initial Point	Unicofour – ≥ 200 Printed Decor – ≥ 175
3.1	Resistance to Surface wear	EN 438-2-10	Revolutions	Wear Resistance – Wear Point	Unicofour – ≥ 450 Printed Decor – ≥ 410
3.2	Resistant to immersion in boiling water
		EN 438·2.12
			%	Mass Increase – 2 ≤ T < 5mm	≤2
			%	Mass Increase – T < 5mm	≤1
			%	Thickness Increase – 2 ≤ T < 5mm	≤2
			%	Thickness Increase – T < 5mm	≥ 1.5
			Rating	Appearance – Gloss Finish	≥ 4
			Rating	Appearance – OtherFinishes	≥ 5